Dataforth Corporation Products
Dataforth Introduces Two High-Accuracy, Rugged IoT Energy Monitoring Modules
- Dataforth Corporation
Dataforth Corporation’s new Instrument Class PWRM10-01 and PWRM20-01 Energy Monitoring Modules encompass more than 35 years of design excellence in the process control industry.
Dataforth’s DSCA High Performance DIN Modules Receive Latest ATEX Certification
- Dataforth Corporation
Dataforth Corporation issued an updated Declaration of Conformity on June 3, 2021, stating that their product family of DSCA Isolated Analog Signal Conditioners–except for modules DSCA33-04x and DSCA33-05x–is in conformance with the latest 2019 EN60079-15 standard, and therefore continues to be ATEX compliant for use in hazardous locations.
Dataforth introduces MAQ20-DORLY20 Discrete Relay Output Module
- Dataforth Corporation
The MAQ20-DORLY20 module offers 20 isolated SPST latching relay output channels that can switch between 2A at 30V and 0.4A at 150V. Each channel has contact state readback to verify the physical output state.
Dataforth adds MAQ20-DIV20 and MAQ20-DODC20SK to the MAQ20 system
- Dataforth Corporation
The MAQ20 system was developed for factory, process, and machine automation; power and energy, oil and gas, and environmental monitoring applications, and also for use in many test and measurement applications.
Dataforth adds strain gage and frequency modules to MAQ20 data acquisition system
- Dataforth Corporation
Designed for a wide range of rugged industrial data acquisition and control applications, the MAQ20 system is ideal for test and measurement, factory and process automation, machine automation, power and energy, oil and gas, and environmental monitoring.
Dataforth releases MAQ20-BRDG1 strain gage input module
- Dataforth Corporation
The module provides 4 channels of strain gage input in a compact module that can interface to quarter, half, or full-bridge sensors using either a 4- or 6-wire connection.
Dataforth releases MAQ20-DIOH high voltage discrete I/O module
- Dataforth Corporation
MAQ20-DIOH monitors high level AC and DC voltages and controls equipment that use high level AC voltage.
Dataforth adds OPC to MAQ20 DAQ system
- Dataforth Corporation
The MAQ20 OPC server uses Kepware Technologies’ KEPServerEX OPC Server and Modbus TCP driver.
Dataforth releases MAQ20 RTD/Potentiometer Module
- Dataforth Corporation
MAQ20-RTD31 interfaces to 3 types of 3-wire sensors: 100Ω Pt and 120Ω Ni RTDs, and potentiometers up to 5kΩ.
Dataforth releases MAQ20 Load Sharing Power Supply
- Dataforth Corporation
The MAQ20 system is made up of DIN rail mounted, programmable, multi-channel, signal conditioning input and output modules and communications modules.